- SS316/SS304 Stainless Steel
- Information supplied based on water media at 68°F.
- All wetted surfaces are sanitary finished to<32RA.
- Seat materials availible in EPDM or Viton.
- Minimum supply air line pressure 80 PSI.
- Operating temperature range: 15°F to 200°F.
Sizes available: 1/2" to 12" / DN15 - DN300
Material: Valve body and disc material can be AISI 304 or AISI 316L, 304L and 316 materials are available upon request.
Max. working pressure: 145psi (10bar) for DN25/1"-DN100/4"; 116psi (8bar) for DN125/5"-DN150/6"; 73psi (5bar) for DN200/8"-DN300/12".
Temperature range: 14 ~ 248°F (-10 ~ 120°C) with EPDM seat, -58 ~ 356°F (-50 ~ +180°C) with Silicone)seat.
Operation:Pneumatic
Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm)
Actuators operation:
1. pneumatic stainless steel actuator, vertical type, also known as spring return or single acting.
2. pneumatic horizontal type actuator, we can make this actuator in aluminum or stainless steel, there are double acting and single acting.
3. electric actuator.
Common methods:
Normally closed (fail closed)
Normally open (fail open)
Double acting---air to open, air to close
Intelligent control: position sensor, C-top controller, C-top controller