Connection ends：welding, clamp, thread and flange
Max working pressure：≤6bar
Compressed air feed：4-8bar
Air port：G1/8", NPT1/8"
Positioner： 6-36V DC 2个NPN or PNP
Solenoid valve：24V DC
Contact part：SS304 or SS316L, upon your request
Normally Closed (NC) - Air to open and spring to close;
Normally Open (NO) - Air to close and spring to open;
Air to Air (AA) - Air to open air to close.
Sanitary pneumatic seat valve,designed for safety and leak detection when two different products
flow through only one valve.The valve is often used as a part in CIP return lines or other systerms not experiancing
pressure spikes offering leakage detection for greater safety.
SMP-BC is remote-controlled by means of compressed air.The valve is a normally closed (NC) valve.
The valve is fitted with two small pneumatic normally(NO) valves,a detecting valve and a CIP - valve.
The valve plug(the upper plug in a change-over valve) has two seals,forming a leakage chamber under atmospheric
pressure between them.Leaking products flows into the leakage chamber and is discharged through the detecting
valve.SMP-BC can be cleaned by CIP by supplying compressed air to the actuator(see fig 1).During cleaning of
the valve,flow pattern against the closing direction of the valve plug makes SMP-BC insensitive to water hammer.
|Max.Product Pressure(depanding on valve specification)||1000kPa(10 bar)|
|Max.product Pressure(depanding on valve specification)||145 PSI (10 bar)|
|Min Product Pressure||Full Vacuum|
|Temperature Range||10 ºC~140 ºC(EPDM)|
|Air Pressure||500-800 kPa(5-8 bar)|
|Air Pressure||72.5-116 PSI(5-8bar)|
|Product Wetted Steel Parts||1.4401(316L)|
|External Surface Finish||Semi-bright(blasted)|
|Internal Surface Finish||Bright(polished),Ra<1.6um|
|Internal Surface Finish||Bright(polished),Ra<64uinch|
|Other Steel Parts||1.4301(304)|
|Product Wetted Seals||EPDM|
Valve Body Combination