Sizes available: 1/2" to 12" /DN15 - DN300
Material: Valve body and disc material can be AISI 304 or AISI 316L, 304L and 316 materials are available upon request.
Max. working pressure: 145psi (10bar) for DN25/1"-DN100/4"; 116psi (8bar) for DN125/5"-DN150/6"; 73psi (5bar) for DN200/8"-DN300/12".
Temperature range: 14 ~ 248°F (-10 ~ 120°C) with EPDM seat, -58 ~ 356°F (-50 ~ +180°C) with Silicone seat.
End connections: clamp to clamp, weld to weld, male to weld, male to clamp, male to male, clamp to weld, flanged
Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm).
Valve body and disc material can be AISI 304 or AISI 316L, 304L and 316 materials are available upon request.
The seat and gasket can be EPDM, Silicone or Viton .
Handles: 3 or 4 positions pull handle, trigger handle with glass fiber or in 304 stainless steel.
Actuators to reach automatic operation: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), and electric actuator.
NC operated: normally closed (fail closed)
NO operated: normally open (fail open)
AA operated: double acting---air to open, air to close
Valve intelligent control: position sensor, C-top controller, C-top controller (AS-I)