Quantity: | |
---|---|
- SS316/SS304 Stainless Steel
- Information supplied based on water media at 68°F.
- All wetted surfaces are sanitary finished to<32RA.
- Seat materials availible in EPDM or Viton.
- Minimum supply air line pressure 80 PSI.
- Operating temperature range: 15°F to 200°F.
- Solenoid valve is 12v or 24v.
Sizes available: 1/2" to 12" / DN15 - DN300
Material: Valve body and disc material can be AISI 304 or AISI 316L, 304L and 316 materials are available upon request.
Max. working pressure: 145psi (10bar) for DN25/1"-DN100/4"; 116psi (8bar) for DN125/5"-DN150/6"; 73psi (5bar) for DN200/8"-DN300/12".
Temperature range: 14 ~ 248°F (-10 ~ 120°C) with EPDM seat, -58 ~ 356°F (-50 ~ +180°C) with Silicone)seat.
Operation:Pneumatic
Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm)
Actuators operation:
1. pneumatic stainless steel actuator, vertical type, also known as spring return or single acting.
2. pneumatic horizontal type actuator, we can make this actuator in aluminum or stainless steel, there are double acting and single acting.
3. electric actuator.
Common methods:
Normally closed (fail closed)
Normally open (fail open)
Double acting---air to open, air to close
Intelligent control: position sensor, C-top controller, C-top controller
Shuangzhan machinery provides quality cam and groove hose fittings with safety drill. The complete system including type A/B/C/D/E/F/DC/DP, we also offer the camlock adapter with flange and tri clamp end. Customized is available, such as male to male camlock, square flange x male plug etc.
The DIN 11851 union is widely used throughout Europe and incorporates a round slotted nut and a flush fitting lipped seal, as standard. The union is manufactured to suit Imperial tube sizes from 1” to 4” and also to suit DIN 11850 metric tube from 10mm to 150mm. Two seals designs are offered for t
Hopper is a container for a bulk material such as grain, rock, or trash, typically one that tapers downward andis able to discharge its contents at the bottom.
ISO-KF Vacuum Flange ComponentsOur ISO-KF vacuum flange fitting and component system is a modular, building block method for creating 0.75 to 4 inch vacuum piping systems. Series 31 ISO-KF vacuum fittings provide several advantages. They use standardized dimensions allowing ISO KF elbows, tees, cros
Guide of Sanitary Valves Sanitary valves are widely used in our daily life, we can see them everywhere. There are many different types of sanitary valves used in different fields. Today, this article will give you a brief introduction of sanitary valves, what’s more, we will inform you of different kinds of sanitary valves.
Stainless steel tri-clamp fittings are the most popular style of process line equipment used within the food, beverage, and pharmaceutical industries. Quickly create a leak-proof connection allowing easy assembly or disassembly for routine maintenance and inspection.
A valve actuator is a mechanical device that uses a power source to operate a valve. This power source can be electric, pneumatic (compressed air), or hydraulic (the flow of oil). There are two main types of actuators, one for each of the two main types of valves that require them. They are rotary a
Shuangzhan machinery produce stainless steel tanks, including
How to install a strainer whatever wye, straight and angle type?Shuangzhan machinery (new tek) provides sanitary stainless steel strainers and filters. Many customers don't know how to mount the strainer correctly according our after service record, so here do some introduction FYI.
With the rapid development of China's economic construction, there are more and more projects in the project with pressure control. In view of the need for equipment pressure relief, safety valves play a vital role in protecting equipment.
Grade 304/316 Stainless Steel Ring Joint Type BSM UnionsBritish Standard Milk (BSM) stainless steel RJT unions were designed specifically for tube installation in the dairy industry, but they are now commonly used in food and beverage processing and the pharmaceutical industries where crevice-free h
Shuangzhan machinery (new tek) provides quality stainless steel valves, which
Date:[2019-04-10] Click:503The tank bottom valve occupies a position in various industries. The tank bottom valve is used for the discharge of reaction vessels in the clean industries such as pharmaceutical, biological, fine chemical, food, etc. The valve has no dead angle, no residue, no leakag
Understand the role and type of regulating valve, which is also known as control valve. In the field of industrial automation process control, by accepting the control signal output from the control unit, the power flow is used to change the process parameters such as medium flow, pressure, temperat
The characteristics of hygienic stainless steel tank bottom valve
Extraction of CBD requires starting with a plant that is rich in the cannabinoid compound. This provides a promise of a good amount of CBD yield at the right quantity. After all, you dont want to put in all the work for a product that will not give you a sufficient yield. A good pick is a Cannabis p
Closed Loop ExtractorA “closed loop” extractor is an extraction method wherein the entire process occurs within a closed vessel. in this process, the hydrocarbon solvent used to extract never comes in contact with the outside atmosphere. The solvent is recycled or looped repeatedly through the syste
application This design is designed to ensure the mixing and leak detection of products when two different products flow through the same valve. It is widely used in food, brewing, beverage, dairy, toothpaste cosmetics, bio-pharmaceutical and other industries.Technical Parameters◆Specifications: 1.
Shuangzhan machinery (newtekindustry) designs and manufactures 4 types strainer mainly, all of them are variety of sizes with high quality, not only surface finish, but also welding and material.Inline strainerSide outlet or Angle strainerY typeS type Cartridge Pipeline FilterSanitary inline straine
Converted beer keg suitable for yeast propagation or special storage needs.